Food Automatic Belt Drying Equipment Fruit Tunnel Dryer

Introduction

In the drying of the material, the paste or sugar is often mixed, the viscosity is generally tight, and the moisture is blocked. When the drying is performed, the central moisture is not easily discharged, and the drying temperature is too high, which may affect the active ingredients of the material. The vacuum microwave equipment combines microwave technology and vacuum technology, which can dry the material in a lower heat state and accelerate the evaporation of the moisture in the material through the vacuum environment, providing a reliable solution for the drying and sterilization of the heat sensitive material. The drying time is 3-5 hours. Vacuum microwave machine is a high-tech drying equipment that combines microwave technology and vacuum drying technology. The equipment has high safety and stability, low drying temperature, short time and high efficiency. The drying temperature of the material under vacuum is about 50 degrees and it is evenly dried.

Characteristics:
Magnetron is made by Japan Panasonic Company and it can be divided into water cooling and air cooling. In addition, microwave transformer can adopt such two kinds of structures too, resulting in easy maintenance and low failure rate. There are several microwave feed in entrances in every unit of heating box and mutual interference between them is extremely slight thanks to the advanced design. Microwave signal generator is constituted by several independent power control circuits. Every magnetron is controlled independently by an overload current safeguard and it can work separately according to the clients need. There is a microwave suppresser installed at the entrance of the machine, ensuring the leakage of microwave conforms to the national safety standard. Teflon closely-woven conveying belt with guide rail is adopted, which is safe, nontoxic and works steadily. The speed adjustment of conveying belt is speed control by frequency variation. Transducer is produced by Japan Panasonic Company and it has precise control and stable performance. On the top of every unit of heating box there is a fume capture arm and flange connecting is left, which can be accompanied with clients own ventilator and xerantic system. As a result, water vapor discharged by materials of heating box can be vented in time, ensuring well drying effect.